Spool Storage Box for 1 kg Spool

Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
Posts: 816
Joined: 2020-06-24 1:56


Download Link:
Hidden Content
This board requires you to be registered and logged-in to view hidden content.


Don`t know what to make with your empty spools?

Expandable spool storage box.
Only threaded rods and nuts are required to connect the coils to each other.

These boxes are for spools with outerdiameter 195 mm and innerdiameter 68 mm.
The height of the boxes is 52 mm but this is not so important because you can change the height in your slicer (disable "uniform skaling")

This is a pattern for the holes needed in the spool to fix the boxes.
120° für the version with 3 boxes and 90° for the version with 4 boxes.

separation wall to device the boxes into two sections

version with 3 storage boxes for one spool

storage box for nozzle`s from 0.1 - 0.4 mm
space for 9 pieces of each variety

storage box for nozzle`s from 0.1 - 1.0 mm
space for 4 pieces of each variety

version with 4 storage boxes for one spool

Storage Box for Ampertec-Spools added

Print Settings
Printer brand:

Ender 3



Printer: Ender 3 (stock) Material: PLA Resolution: 0,2 mm Nozzle: 0,4 mm Wall Thickness: 1,2 mm Wall Line Count: 3 Infill: 20 % Speed: 60 mm/s Support: No Build Plate Adhesion: 1 Skirt Line

Created by -Maggo- in https://www.thingiverse.com

Post Reply