GEMINUS Dual Filter COVID-19 Coronavirus Face Mask V2

Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
AnetLau
Posts: 816
Joined: 2020-06-24 1:56

Image

Download Link:
Hidden Content
This board requires you to be registered and logged-in to view hidden content.


Summary

Face mask to protect against air born viruses like coronavirus. Mask is not a one-size-fits-all. You may need to print at different scales to see which one works best.

Inspired by face mask from
https://longliveyoursmile.com/3d-printa ... -covid-19/

Features:
-Easy to clean design (no threads or complex parts)
-Comfortable fit (smoother, thicker contours and edges)
-Dual filters (use N95 particle sheets or round cotton pads)
-Moisture trapper (reduce moisture buildup at chin)
-Easy to breathe (Up to 300 cc of volume)
-Optional face mask seal with flexible material or TPU (print groove facing up, see print settings below)

Instructions:
Scale to size for:
-Small - 95%
-Medium - 100%
-Large - 105%

1) Print with front of mask facing down on build plate with no supports.
Please see picture above.
2) Sand down any rough edges with 220 grit sandpaper.
3) Attach 1/4" flat elastic bands to the mask.
See picture above for an example on how to attach.
4) Press fit filter sheets using an inner ring for each vent.

Optional:
1) Use a hair dryer to heat up edges and contour to your face.
2) Initial your masks in case you have more than one in the family.

Printing time: 3-6 hours depending on size

Disclaimer: This is not a replacement for proper N95 masks. If you can get your hands on N95 masks, please do so and use those. If you cannot, then having this is better than none.

For printing with TPU:
Layer Height: 0.2 mm
Wall/Top/Bottom Thickness: 1.2 mm
Extruder Temp: 230 C
Bed Temp: 60 C
Flow Rate: 125%
Infill: 40%
Speed: 20 mm/s
Retraction: No
Combing Mode: All
Cooling: No
Supports: No

Please comment on your fitment and any issues you had. Thank you.

Print Settings
Printer brand:
Creality

Printer:
Ender 5

Resolution:
0.2mm

Infill:
20%

Filament_brand:
Creality

Filament_color:
White

Filament_material:
PLA

Notes:
Print with front of mask facing down on build plate.



Created by vulevu121 in https://www.thingiverse.com


Post Reply