Simply Flexible Mask Covid-19

Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
Posts: 816
Joined: 2020-06-24 1:56


Download Link:
Hidden Content
This board requires you to be registered and logged-in to view hidden content.


Yet another easy printable and usable mask.

(---- Notice ----)

Why will I not design this mask for printing in PLA or PETG?!
I get quite a few requests to convert this design for printing in PLA or PETG. Sorry, but I am not going to do that, and this is why:
In my experience, PLA and PETG are TOO DANGEROUS to put on your face. If a PLA or PETG mask cracks, especially when printed as a light weight/thin wall, it will cut your face like a knife. It may not be happen on the first day, but it will happen one day, maybe while you are talking, and it will be sudden. Thin walled PLA and PETG will fatigue much faster than TPU, being washed, dragged and pulled in daily use. Maybe something hits your mask while you are wearing it, and it splits or shatters.

Let's see poor Kevin in the following videos:
For Part 1 in PLA please go here:

For Part 2 in PLA please go here:

For Part 3 in ABS please go here :

For Part 4 in PET-G please go here :

That is why I don't want to convert this design to use PLA/PETG. It is for your safety.

(--- DISCLAIMER ---)
Print and use it at your own risk.

Uses up to 2mm thickness Ply Filter. Mask weight 21gram.

I made this for the community, for the time being the shortage of surgical mask, due to the outbreak of the Covid-19 virus.

Read my PROFILE page if you want to redistribute my design materials to others, for free or for commercial.
Good Luck everyone and my loves.

STL size based on 58cm head circumference. (Refer to photo of T800 for measurement)
Just scale in slicer on XY by 1/58*[your figure] .

Personally I prefer the this version
Simply Flexible Mask Valvy
Flexible Mask Valvy

Welcome comments and suggestions.

Tip me a cheese burger and subscribe my YouTube Channel if you like my work.

Createdby iczfirz in

Post Reply