Velociraptor Head For Wall (Large)

Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
AnetLau
Posts: 816
Joined: 2020-06-24 1:56


Image


Download Link:
Hidden Content
This board requires you to be registered and logged-in to view hidden content.


Summary

The Velociraptor Head is a little more complex to print than many of my other animal heads because the teeth require support. You will probably also want support for the back of the jaw, but this model printed fine for me without support going all the way up to the chin. When slicing this model make sure the teeth are connected to the mouth properly (the model overlaps itself in those locations).

This can be mounted firmly to the wall using
Thing 3865583 - Bracket for Wall Mountings

The bracket has room for two screws, but I've found that using only the top screw hole is sufficient. I've also added a small slot, so this can also be hung with just a nail if you prefer.

For similar models see my
Collection of Animal Heads/Busts
that I have designed or remixed. All of these designs use the same bracket to mount to the wall.

If you print one, please consider posting a make!



Created by UWcharlie1983 in https://www.thingiverse.com/

Image


Post Reply