"HexiBox" Tang Band W3-1876S Subwoofer Enclosure

Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
Posts: 816
Joined: 2020-06-24 1:56


Download Link:
Hidden Content
This board requires you to be registered and logged-in to view hidden content.


Print & demo video:

This is a subwoofer enclosure for a Tang Band W3-1876S mini subwoofer which you can purchase here:
https://www.parts-express.com/tang-band ... r--264-909

Usable frequency response: 38Hz-200Hz.
Power handling: 30W

I printed mine using the RepRapper Black PLA for the lower section, and Hatchbox Orange PLA for the upper section. Sliced in the Prusa Slicer, 0.4mm nozzle, 0.2mm layer height, hot end at 215 deg, heat bed at 60 deg. 4 perimiters all the way around, 20% rectilinear infill. No supports required. Best of luck, everyone!

Created by HexiBase in https://www.thingiverse.com/

Post Reply