PiNAS - The Raspberry Pi NAS

Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
AnetLau
Posts: 816
Joined: 2020-06-24 1:56


Image

Image


Download Link:
Hidden Content
This board requires you to be registered and logged-in to view hidden content.


Summary

This case can be used to build a very compact Raspberry Pi powered two bay network attached storage (NAS).

If you like the design check out my page
AraymBox
for other projects. You can also post ideas on how to improve the design.

If you want to rebuild this NAS check out my instructable:
https://www.instructables.com/id/PiNAS- ... rry-Pi-NAS

You can leave a tip (button left) if you like my stuff.


Standard Parts:

piNAS_Guts_HDD: Cage for normal 2.5" HDDs
piNAS_Case_Front: Front part of the case
piNAS_Case_Middle Middle part of the case
piNAS_Case_Back: Back part of the case

Special Parts:

piNAS_Guts_SSD: Cage for slim 2.5" SSDs
piNAS_Case_Front_Inlay: Front part of the case for inlays like wood
piNAS_Case_Front_stopper: Stopper for the inlay
piNAS_Case_Front_Fan: Front part of the case if you want to add a 40mm fan
piNAS_Case_Back_Pi4: Back part of the case for a RasPi 4

Updates:

04-FEB-2020: Released
05-FEB-2020: Added piNAS_Case_Front_Fan
05-FEB-2020: Added piNAS_Case_Back_Pi4
Print Settings
Printer brand:
Prusa

Printer:
i3 MK3

Rafts:
No

Supports:
No

Resolution:
0.2

Infill:
25%



Created by araymbox in https://www.thingiverse.com/


Post Reply