Raspberry Pi 4 case

Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
AnetLau
Posts: 816
Joined: 2020-06-24 1:56

Image

Download Link:
Hidden Content
This board requires you to be registered and logged-in to view hidden content.


Summary

This is a quick remix from one of the most used Raspberry PI 2/3 cases to fit the new Raspberry PI 4.

Edit 30-06-2019:

I made the first design based on the uGreen micro-HDMI to HDMI adapter.
Amazon.de

The official raspberry micro HDMI cable has a bigger micro HDMI connector.
I added additional STL and step files to accomodate the bigger connector.
As I do not own the official micro HDMI cable I cannot confirm that it fits.

Edit 19-09-2019:
As user nophead pointed out in the comments there were two small slits in the bottom part (near the sd card). I fixed this in the source and re-uploaded all stl and step files.



Created by plammers in https://www.thingiverse.com


Post Reply