Tesla Cybertruck

Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
Posts: 670
Joined: 2020-06-24 1:56



Download Link:
Hidden Content
This board requires you to be registered and logged-in to view hidden content.


A 3D model of Tesla's new pickup "Cybertruck"

It is Modeled so you can install Red and White 5mm Led's under the
"Hood" (accessible from inside the car ) and in the trunk.

Supports should be set to "from build platform only" but you'll need to place custom supports for the headlight slot.

Please send pictures if you made one and give me tips on how to improve the model!
Feel free to doante: paypal.me/Wallerstedt1


11-23-19 : Added Seats, Steering wheel and Display

11-24-19: Fixed The front part of "Main", Added printable headlights and rearlights,
Added holes in cabin and in trunk for wiring, Added Trunk cover and top with
cutout for trunk cover. i recommend cutting out a thick paper piece that fits in
the slot for a nicer finish

11-26-19: Updated wheels, Fixed cybertruck Main bugs, Added STEP file
12-08-19: improved wheels

Created by _Nalle_ in https://www.thingiverse.com

Post Reply