IT Pennywise night light

Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
Posts: 816
Joined: 2020-06-24 1:56




Download Link:
Hidden Content
This board requires you to be registered and logged-in to view hidden content.


Enjoy your own Pennywise night lamp while you wait for the second movie.

You need

1x LED red (balloon)
1x LED yellow (lower middle)
2x LED white (eyes and lower right)
4x 100Ohm resistor
3V power source

Print the head and balloon without infill to insert the LEDs.

To add some details i have used some sand for the tarmac and green cloth for the gras.

Sweet dreams. :)

Print Settings
anycubic i3 mega



0.3mm - 0.1mm


Created by OneIdMONstr in

Post Reply