Fully 3D-printable turntable

Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
AnetLau
Posts: 816
Joined: 2020-06-24 1:56


Image

Download Link:
Hidden Content
This board requires you to be registered and logged-in to view hidden content.


Summary
I created a new and improved version of this turntable. The new version uses an Arduino Uno, stepper motor, 1602 LCD screen and a 9g servo motor. The turntable is now able to automaticaly take photos 360 degress around which can be turned into a 3D-model using photogrammetry software. You can check it out here:
https://www.thingiverse.com/thing:3958326

A turntable wich you can fully 3D-print, no extra parts needed!

It can be used to make beautiful cinematic shots of objects but it can also be used as a rig to make photos for photogrammetry software so you can 3D-scan objects.

The large black 'slide bearing' is printed in one peace and is free to move the moment it comes from the printbed. The print in place of moving objects adds to the simplicity of the build. The turntable is designed to be snap fitted without the need for glue, but depending on your printer, some glue might be a good idea to keep parts at their place.

Once the turntable is fully assembled, it might be hard to rotate it. I used some fine machine oil to lubricate all the parts and just turned it a lot so some wear and tear could accur wich helps with the smoothness. Once lubricated it turns very smooth. (of course not as smooth as if you were to use a bearing but pretty smooth for something wich is completely 3D-printed).

I added a white platform template to the files (pdf) wich can be printed and cut out with cissors. the diameter of the circle is 10 mm wider than the platform.

Video can be found here:


More info can be found here:
https://hackaday.io/project/166323-full ... -turntable

Recommended Tools:

3D-printer:
https://www.banggood.com/Creality-3D-En ... kid=677427

All my project files, instructions, schematics, are provided for free so everyone around the world can enjoy them. Feel free to support me so I can create and share even more awsome projects. Any amount of support is greatly appreciated :-) paypal.me/BrianBrocken
Feel free to take a look at my other designs:

UMC - Universal motion controller:
https://www.thingiverse.com/thing:4245315

3D-printable Davinci catapult gift card:
https://www.thingiverse.com/thing:4067668

Arduino controlled photogrammetry 3D-scanner:
https://www.thingiverse.com/thing:3958326

Fully 3D-printable turntable:
https://www.thingiverse.com/thing:3723618

RC FPV tank rover:
https://www.thingiverse.com/thing:3587738

Fully 3D-printable wind-up car gift card:
https://www.thingiverse.com/thing:3308710

3D-printable High torque servo/gear reduction:
https://www.thingiverse.com/thing:3292860

'BOOM box' high voltage capacitor bank case:
https://www.thingiverse.com/thing:2980012

Subby the interactive youtube subscriber robot:
https://www.thingiverse.com/thing:2928254

robot hand || bionic hand prosthesis prototype:
https://www.thingiverse.com/thing:2838239

3D-printable linear actuator:
https://www.thingiverse.com/thing:2783959

Mini 3D-printable crossbow:
https://www.thingiverse.com/thing:2710472

8 legged spider robot:
https://www.thingiverse.com/thing:2470882

best 3D-printable bearing:
https://www.thingiverse.com/thing:2349065

Have a nice day!

Print Settings
Printer brand:
Anet

Printer:
E12

Rafts:
No

Supports:
Yes

Resolution:
0.2

Infill:
25%

Filament_brand:
Esun

Filament_color:
Black and Orange

Filament_material:
PLA

How I Designed This




Created by Bribro12 in https://www.thingiverse.com


Post Reply