Ender 3 - Ender 3 Pro Side Mounted Spool Holder

Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
AnetLau
Posts: 816
Joined: 2020-06-24 1:56



Image

Image

Image


Download Link:
Hidden Content
This board requires you to be registered and logged-in to view hidden content.


Summary

There is a newer version of this thing which prints faster and is easier to assemble at this link:
https://www.thingiverse.com/thing:4461496

There is a Remix\Alternative Version of this thing here:
https://www.thingiverse.com/thing:4399949/files

Update:07\01\20

Uploaded a variation (E3_Spool Holder_V2) with extended fixing slots to allow the part base to be set flush with the bottom of the extrusion and therefore facilitate the integration of an Ender 3 foot on the spool holder. This version is untested so please treat as WIP.

I wanted a spool holder that was connected\fixed to the printer, side mounted that did not put strain \vibration on the frame. I therefore knocked this up for my latest Ender 3 Pro. I admit this may be slightly over engineered but I wanted something that was robust and would last.

Apologies in advance if there is a similar thing uploaded\published that I have not noticed.

You will need 3 x M5 x 20 mm Bolts + Nuts to attach the stock Ender 3 spool holder to the thing. You will also need 2 - 4 M4 x 10 mm Bolts + T nuts to fix into the side 2020 extrusion.

Printed with PrimaValue Orange PLA, 210C, 50C Bed,.02 resolution, 30mms, 30% infill and 3 perimeters.



Created by BoothyBoothy in https://www.thingiverse.com


Post Reply