Creality HotEnd Fix

Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
Posts: 816
Joined: 2020-06-24 1:56


Download Link:
Hidden Content
This board requires you to be registered and logged-in to view hidden content.


This simple hotend fix for your Creality Ender 3, CR-10 or just about any Creality Printer is based on Luke Hatfield design. I created a thicker washer and explain how to install it in this video:

Update 6/22/2020:
I added a 3mm and 2mm thick washer to the files for those that find the 4mm I used in the video is too thick. They print fast so you could print all three and see which works best for your setup.

I printed in PLA as the top of the Hot End should never get hot enough to soften or melt PLA.

Created by Elproducts in

Post Reply