(6/2019) Artillery Sidewinder X1 Bed Cable Strain Relief (OUTDATED) Relief (OUTDATED)

Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
AnetLau
Posts: 816
Joined: 2020-06-24 1:56

Image

Download Link:
Hidden Content
This board requires you to be registered and logged-in to view hidden content.


Summary

Really needed a bracket to ensure that my bed cable wires won't snap off anytime soon. There was already one I found on Thingiverse but it didn't appear to fit mine well. I'm thinking that the bracket made by AJCROSS is for an older version of the printer.

Requires 2 small cable ties.

Edit as of 3/22/2020

Uploaded fusion360 file to make it easier for others to modify.

This was made for a 6/2019 version of the printer, please note it may not be compatible with your version of printer. Check out the remixes done by other people!

Print Settings
Printer:
Artillery Sidewinder X1

Rafts:
Doesn't Matter

Supports:
Doesn't Matter

Resolution:
.2

Infill:
10%

Filament_brand:
Hatchbox

Filament_color:
Yellow

Filament_material:
PLA



Created by Mwww in https://www.thingiverse.com


Post Reply