MY FIRST PRINTER

Anet 3D printers, add-ons and OEM
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
AnetLau
Posts: 816
Joined: 2020-06-24 1:56

The first 3d printer is always an illusion, maybe you waited a long time to buy one, or you watched several videos and finally decided to buy one, or you decided to start a 3d business, or whatever it was.

Now you are in the world of 3d printing, but you may be wondering And now what do I do?Well don’t worry, here I will give you some tips to start using your 3d printer and make your first impressions.


Image



The first thing you should do when your printer arrives is to unpack it and read the instructions or the user manual,I also recommend you watch several videos or tutorials on how to assemble your printer, while you learn all the parts that make up your printer.


Image
Image


TAKE IT EASY


Assemble your printer with calm, take your time and adjust all the screws, nuts, straps, etc.


Image
Image
Image



Find out about the printing materials and which brand of filament is the best for you in terms of price and quality, a good advice is to always buy good quality filaments, believe me it will save you a lot of headaches.

Know the very well your printer, what type of filament it can print, what maximum dimensions it allows, its type of extruder, its firmware, hot bed, etc.


PATIENCE



I really recommend printing groups, these are very large communities where they can help you and inform you about your specific printer. Here is this link: https://www.facebook.com/groups/409347649 461989/

I also recommend that you know and familiarize yourself with the software that you are going to use.

This software is called a slicer , for example Ultimaker CURA or Prusa Slicer which are free or paid like Simplify3d.


Image



Be very patient, very very patient, the learning process is slow but believe me it is worth it.

It begins with the leveling and calibration of your bed, this step is very important since it depends on this that you have a good quality in your pieces.


Image



3D printing is trial and error, printing is not just pressing a button and that’s it.

You must learn how to use the slicer and see what parameters work for your type of filament and your printer.

For your first impressions you can use ready- made models on pages like:

www.thingiverse.com, www.myminifactory.com, www.prusaprinters.comwww.cults.com


Image



And later create your own designs.


PRINT, PRINT, PRINT



Do not despair or give up if your first impressions go wrong, over time you will see that you will improve, everything is practice and knowledge.

Be very careful with hot parts, always use tools, normally all printers include their own tools, make sure everything is well adjusted before printing, place your printer in a ventilated environment and away from flammable objects.


Image
Image



The important thing is to print and read a lot, watch a lot of tutorials and just enjoy your prints!

Learn from mistakes and do not give up and finally do not be afraid of failing in your first impressions, and as they say out there the sky is the limit.

I encourage you to set yourself printing challenges and see your first impressions and with as time goes by, compare them and you will see how much you have advanced.


Image



I hope this information is helpful and I wish you excellent prints!

A R T I C L E B Y : E L I A S R U I Z ” N O M A N A T E C H “


Post Reply