I am Groot.

Anet 3D printers, add-ons and OEM
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
AnetLau
Posts: 815
Joined: 2020-06-24 1:56

Christian Francisco Rivera shared with us his Groot flower pot in PLA on Reddit.
And also settings for the print.

Image

Model file designed by FANPLASTICO on Thingiverse https://www.thingiverse.com/thing:2592451.

The settings of the Anet-A8 using Cura 3.2.

*Extruder size = 0.4

*layer height = 0.2

*wall thickness =0.8

*top/bottom thickness = 0.8

*infill =15%

*Print temp = 197°C (on gold filament from soultech)

*Hot plate temp = 50°C (using a borosilicate glass)

*Filament diameter = 1.75

*Flow = 90% Enabled retraction (yes)

*Print speed = 45 mm/s

*Travel speed = 120 mm/s

*Enable print cooling (yes)

*Fan speed = 100%

*Minimum layer time = 5 s

*Minimum speed = 10 s

*Generate supports (yes)

*Overhang angle = 50° Pattern ZigZag

*Plate adhesion = Brim Brim width = 8.0 mm

Christian Francisco Rivera has a few upgrades for A8 to support stability and stop the "jerk" when transitioning between X and Y on sharp corners... including belt tensioners and ball bearings for the Z rods. And he also added a solid base to prevent the frame from warping when tensioning the Y belt as well as T joints to the top of the frame.


Post Reply