ET4 M503

Anet 3D printers, add-ons and OEM
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
Posts: 1
Joined: 2020-08-24 19:40

I have firmware 1.1.7 on my ET4 and I'm trying to run code M503 but nothing happens. I followed the directions found here <>. I have tried getting the values from Pronterface and via OctoPi but it doesn't do anything. No response on Pronterface and simply "Ok" on octopi. Any idea whats wrong? trying to tweak steps based on cal cube and benchy results.

ET4 and ET5x
Post Reply