Anet A6 X/Y orthogonality settings

Anet 3D printers, add-ons and OEM
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
Nixies
Posts: 1
Joined: 2020-08-19 11:22

Hello,
I purchased an Anet A6 and I used it for creating many different pieces.
However, last week I tried to print a Raspberry Pi 4 Box and I noticed that it is not completely orthogonal (X/Y). The angle not 90°. Indeed, the X and Y sliders are not orthogonal.
Do you know how I can fix this problem ? I there a way to adjust this X/Y orthogonality ?

Thank you very much.


User avatar
AnetLau
Posts: 797
Joined: 2020-06-24 1:56

Nixies wrote: 2020-08-19 11:30 Hello,
I purchased an Anet A6 and I used it for creating many different pieces.
However, last week I tried to print a Raspberry Pi 4 Box and I noticed that it is not completely orthogonal (X/Y). The angle not 90°. Indeed, the X and Y sliders are not orthogonal.
Do you know how I can fix this problem ? I there a way to adjust this X/Y orthogonality ?

Thank you very much.
do you means that X axis and Y axis are not become an right angles? It may be related to the Cura parameter, or the machine sheet metal is not installed properly.

could you take some video about your issue?
Post Reply