Vintage Streetlight Replica

Anet 3D printers, add-ons and OEM
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
Posts: 816
Joined: 2020-06-24 1:56

Hi guys, there goes another high-end model from Tomas Aceytuno to encourage you to enrich your print-days! Tomas introduced the process of printing a streetlight on Anet N4. Hope you all enjoy it!

First, loaded the file of the streetlight model you can learn its system, quolity and definition.

streetlight stl model

The structure of the model is separated into parts but we didn't hurry to export it out for we had to drill some little holes that we later needed to cross the lamp wires through, and, of course, to add to dense supports also counts.

add supports on Anet N4 Al slicer

But during the process of slicing, it appeared to be slow. Never mind, you can go on it will offer you solutions for various troubles caused by your models. And the problem of slicing slowly was handled quickly.

repairs your 3d stl files online

So the following was to export it into .N4 and patiently waited it to complete its work. It would not take long time cuz N4 prints several pieces at the same time. And then we took these parts out, removed the support and put them in the UV lamps to clean the resin remains. We had our pieces in quite detail.

use UV lamps to clean the resin remains

Only left to use primer ...

Only left to use primer ...

We changed resin into white one and printed out a piece of glass that perfectly fitted the groove. That was amazing, and finally mount a led lamp to our streetlamp and glue the parts.
mount a led lamp to our streetlamp and glue the parts


Once everything was assembled and tested. It was time to just turn on the lights!


User avatar
Posts: 1
Joined: 2020-09-21 20:46

Is it possible to put the STL link?
Post Reply