Bigger and more sophisticated, try the ANET ET5 3-dimensional printer

Discuss 3D Scanner/3D Scanning machines here!
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
AnetLau
Posts: 816
Joined: 2020-06-24 1:56

bigger, more sophisticated and more powerful, this is a product from anet3dprinter, it can 3d print up to 30x30x40cm, you know, we can use it to make tools that can help us in carpentry hobbies, it can also print knick-knacks creations for our homes so that they are even more beautiful.

This video is from Indonesia User, Tukang Jadi jadian, hoping you could learn more about his review~



If you have any problem, you could discussing in this post~


User avatar
darenlsl
Posts: 2
Joined: 2020-09-23 18:33

I have a Anet ET5. Its a great printer except for the noise (due to drivers) and compatibility with the default firmware.

have a few question and hoping someone here can help.

Firmware 1.1.7.

Octoprint issue: I can send print but the print keep pausing during print for like 30 sec before continuing. This makes it octprint un-usable as the pause cause alot of oozing during the pause. Anyone have any ideas?

Driver upgrade: How do I upgrade to TMC2008 driver? Can the ET4 TMC2208 board be use? and if so, what about the firmware? Would i be able to just upgrade the 1.1.7 firmware using the same upgrade method?
User avatar
plame
Posts: 1
Joined: 2020-11-24 21:28

darenlsl wrote: 2020-09-23 18:46 I have a Anet ET5. Its a great printer except for the....

Driver upgrade: How do I upgrade to TMC2008 driver? Can the ET4 TMC2208 board be use? and if so, what about the firmware? Would i be able to just upgrade the 1.1.7 firmware using the same upgrade method?
I am also wondering if it is possi le to upgrade the standard or X version of ET5 and make it a PRO version just by replacing the mainboard and if it is possible to use ET4-board on ET5?
Post Reply