LittleBots: LittleArm Big

Discuss 3D Scanner/3D Scanning machines here!
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
AnetLau
Posts: 816
Joined: 2020-06-24 1:56

LittleBots: LittleArm Big

Image
A few arms getting together (Source: Slant Concepts via Arduino)


Another educational model, the LittleArm Big was intended as a training tool for high school and college students in STEM classes.

This complex 3D printed servo robot arm was designed by Slant Robotics in 2017 and can reach up to 11.5 inches (~29 cm). It can also carry up to 0.25 pounds (~113 grams).

The arm is meant to be programmed and has the capability to be controlled from Bluetooth and Windows applications. If you have iOS, you’ll have to go from Python Code.

Of the less than 50 components of this robot, the 12 parts that aren’t servos and electronics (its controlled by an Arduino Nano) are 3D printed. The files for 3D printing can be found on the LittleBots website and cost $20. They’re all fully optimized and simple to print.

The makers claim you can assemble the Big in under two hours, but the six DOF arm may require more experience to build and tune.




Created By Kevin Schultz


Post Reply