ET5 X not wanting to print model

Discuss 3D Scanner/3D Scanning machines here!
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
Ruthlessfx
Posts: 3
Joined: 2020-11-04 11:48

Hey guys I just got done slicing my 3d model in simplify3d using the CR10 S pro profile. It loads the model then just moves to the finished position saying the print has finished without even trying to print. Has anyone else had this problem?


User avatar
Ruthlessfx
Posts: 3
Joined: 2020-11-04 11:48

Nevermind. I reformated my sd card and that fixed it.
Post Reply