ET4 - After few layers, temp head switch off

Tips & Tricks to tweak your printers, as well as technical help. Topics MUST contain the type of printer you are addressing!
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
Posts: 1
Joined: 2021-01-18 5:06

Hi. I have a problem with my ET4. After the preheat, printing starts. After a few layers, the temperature of the printhead switches off. The print continues without filament. I've already exchanged the heating pipe. The same problem. What can I do?

Best wishes Mitch

User avatar
Posts: 7
Joined: 2020-11-17 16:13

Check the Tempsensor incl. Harness
Temp Failures are most a Sensor trouble.
Post Reply