What if the filament is not discharged from the machine?

Tips & Tricks to tweak your printers, as well as technical help. Topics MUST contain the type of printer you are addressing!
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
Posts: 813
Joined: 2020-06-24 1:56

What if the filament is not discharged from the machine?


1. When the nozzle is heated to 250 degrees, click [feed and retreat-feed], and then the filament will be discharged.

2. Heat the nozzle to 150 degrees, click [Settings-Manual Control-"Z-Axis Move to the Highest Position"], replace the nozzle with the delivered tool, and be careful of burns. Remember to drain the remaining consumables in the Teflon tube and throat after unscrewing the nozzle.

Post Reply