Print Trump Smile Hollow with Anet ET4 Pro 3D Printer

Tips & Tricks to tweak your printers, as well as technical help. Topics MUST contain the type of printer you are addressing!
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
AnetLau
Posts: 815
Joined: 2020-06-24 1:56

There is no doubt that Donald Trump is the most controversial person in the year 2020, and even in the long list of US presidents. As the 2020 US election comes closer and closer, like him or not, Mr. Trump attracts more eyes than ever before not only in the U.S. but also around the world. And 3D printed bust of Trump becomes popular too these days.

Image
Trump Smile



Anet team recently printed a “Trump Smile Hollow” model with ET4 Pro 3D printer and live broadcasted the printing on both Facebook and YouTube. It attracted a lot of 3D printer users and we’d like to share some details of the print here too.


Cura Settings & Tree Support


Image





Settings:

Layer height: 0.15mm

Wall thickness: 1mm

Infill density: 10%

Build plate temperature: 60℃

For detailed Cura setting file, please click on below links:

https://drive.google.com/file/d/1ruhXt_ ... sp=sharing

We also used tree support on the bust to ensure solid 3D printed upright posture of its head.


Image



Tree support used on another Trump Smile 3D model. It’s not hollow but solid and we’ll reveal the printing of it in the next article.

Tree support is a newly added feature in the support section in the new 4.7.1 Cura version. The new feature is actually a hand like support with a big palm to support the whole chin, which reduces huge amount of filament consumption when comparing with commonly used pillar supports (a lot of pillars used to support).


Image
Image



Also, we used blocks (see above pictures) hold some extruding parts of the bust to keep a good intricate shaped surface of hairs and ears. Holding blocks is also a good function in Cura to reduce supporting pillars on 3D printed models and maintain intricate model surface to demonstrate detailed features of original 3D files. If you use the common way without holding blocks, you might get a coarse printed 3D model which have been already tested by us.

Without holding blocks, complicated surface such as a wrinkled face tends to printed out with a lot of excessive filament that are difficult to remove.

After all the settings were done, we began the printing with an Anet ET4 Pro 3D printer. The printer is easy to operate and suitable for rookie 3D printer users. It prints 220*220*250mm large 3D model at 0.15mm accuracy. With TMC2208 stepper driver installed on its mother board, the ET4 Pro 3D printer performs model printing at super low noise. It’s quiet and doesn’t disturb you watching TV, doing homework or sleeping at night.

After nearly 6 hours printing, we finally got a well printed orange 3D model of Trump Smile Hollow bust.


Image
Image


Most controversial man in the year of 2020, love or not?





Post Reply