Anet V1.7 Mainboard Issue

Tips & Tricks to tweak your printers, as well as technical help. Topics MUST contain the type of printer you are addressing!
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
sponsormetape.mp4
Posts: 1
Joined: 2020-10-20 23:00

Hello,
Last week I was a bit stupid and broke a stepper driver on my Mainboard. I ordered a new one and when it arrived and I connected everything, the display shows nothing but a new brackets after a restart and the display give weird squeek noises. Do I have to flash firmware or is it a indicator I got a broken one? And are there tutorials how to install the original Anet A8 Plus Firmware? I just find Marlin Tutorials and they all not work.
Kind regards


User avatar
mcandrewji
Posts: 1
Joined: 2020-12-27 13:54

The Board should come with a firmware installed it is possible you received one that is blank or may be for another printer model, several Anet models use the same board. Assuming that the board is functioning. You can contact supplier and verify what they sent you the correct one or will exchange alternately you can flash the correct firmware for your model.
Post Reply