How to Make Prints Stick on the Print Bed

Tips & Tricks to tweak your printers, as well as technical help. Topics MUST contain the type of printer you are addressing!
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
AnetLau
Posts: 158
Joined: 2020-06-24 1:56

Have you ever got so mad that you almost give up at the very beginning? When the nozzle drags a very long filament to roam around on the platform or when a ball of filaments just even get thrown out of the platform? So, how to get filament tractable and stuck to platform firmly? Here are some useful approaches to get you out of these troubles.

Tips 1: Add Brim or Raft on Slicer

Now, most slicing software has developed some special functions that can automatically add to your model a large enough area of base plate adhered to the platform. For instance, in Cura there is an option called “Platform Adhesion Type” where you can select a brim or raft to print. And you can also find similar options in other software. Especially, if basal area of your model is too small to adhere to the platform, to use this function can well have you pull through.

Image
Add brim on Cura

Tips 2: Use Glue on Platform

Beyond that, some blunt methods can also work effectively, such as using adhesive. Some common and popular glues are enough to satisfy your demand. And you could also use your hair spray. You can just glue a thin layer and the print will become similarly adhered to the platform.

Image
Use Glue on Build Platform

Tips 3: Leveling is Important

If the both methods above don’t solve your trouble, you have to consider this basic question: is your platform still unleveled? Because you can never get a very even print in an unleveled platform. Careful leveling can actually decide whether the whole printing process will cause trouble or not.

Image
leveling nut of Anet ET4 Pro

As to how to complete a perfect leveling you can refer to our product tutorials on our official YouTube channel. Finally, wish you guys print happily, bye!


Post Reply