ET4 Configuration on Cura

3D printer software and firmware discussion, sharing, and downloads
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
AnetLau
Posts: 200
Joined: 2020-06-24 1:56

Hello guys, this guildline is for those who met with troubles when Anet ET4 printer cannot perfectly print out the file edited on Cura. Here we introduce “auto” and “manual” two methods to configure the best Cura setting for ET4!
Let's get started!


  • Cura profile of Anet ET4 for auto load:


I. Here We provide configuration files for Mac and Windows

ET4 Configuration on Cura for Mac https://drive.google.com/drive/folders/ ... juFD_blgmA

ET4 Configuration on Cura for Windows https://drive.google.com/drive/folders/ ... CE8mb8DCEz


  • II.Now import them into Cura!


2.1.On Ultimaker Cura(matching ".curaprofile" files):
Open “Preferences--->Profiles--->Import--->ET-4 Cura Ultimaker.curaprofile (ET4-Mac.curaprofile for Mac user)”

2.2 On Cura DGO 14.07(matching ".ini" files):
Open “File--->Open Configuration--->ET4 CURA 14.07.ini”


  • Cura profile of Anet ET4 for manual settings:


(Refer to or download the pictures below to acoordingly set each item of parameter.)

I. On Ultimaker Cura

Image


II. On Cura DGO 14.07

2.1 Select “File--->Machine Setting--->Add new machine---> Prusa Mendel i3”

Image
Cura 4.3 Settings for Anet ET4


2.2 According to the pictures below, set each item of parameter.

Image
Anet ET4 Cura Profile

Image
Anet ET4 Cura Setting

Image
Anet ET4 Cura Configuration


All steps are put above. Welcome to contact us if you have any problems. Hope you all can have a good printing experience on ET4! See you next time.


Post Reply