ET4's Newest Firmware Update 1.1.5 Has Released Now!

3D printer software and firmware discussion, sharing, and downloads
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
AnetLau
Posts: 200
Joined: 2020-06-24 1:56

How are you doing guys? ET4 was upgraded agaaaaaaain~
Yes, today We'll push the newest ET4 firmware update - Version 1.1.5
So now let's check together, what are the new functions it has prepared for us!

Caution:
1. Format your SD card or change a high-quality one before updating!
2. We don't support users, with the firmware file of ET4, to flash the firmware of ET4 Pro, ET4X, ET5, and any other models of printers. Otherwise, any damages caused by that shall be undertaken by users themselves without warranty service support.
Thanks for your understanding.
P.S: The main marker, except the nameplate attached to the left side of machines, to distinguish between ET4 and ET4 Pro is to identify their printerheads' appearance. You can have a clear impression of them from the two pics below.


Image
ET4's Printerhead

Image
ET4 Pro's Printerhead


Download link below!
https://drive.google.com/drive/folders/ ... N1gBn9WV1n

First, yeah, it has once for all solved this nerve-wracking issue - SD card cannot be plugged off when the machine is operating. Now, we 'll say goodbye to it!

Second, we have optimized the leveling compensation process, yes, an absolutely simplified automatic leveling function has come out. In addition, some users reflected that their homing ET4 without leveling when using it first time would get its extruder stuck. Now this problem will never emerge again with updating our newest firmware

Third, some bugs in the firmware that would brisk the machine after updating have been repaired. We believe a safer updating will be ensured

What are you waiting for? Just update the firmware now, the new firmware will go on providing you with a better experience! But, yeah, we still have the responsibility to provide assistance to those who might brick our ET4(though there's only a slight possibility). So in case, you should check out this:

viewtopic.php?f=18&t=71
ANET ET4 FIRMWARE UPDATING GUIDELINES


Post Reply