Page 1 of 1

Firmware & Mainboard of Anet ET4, ET4+ and ET4 Pro

Posted: 2020-06-29 0:58
by AnetLau
Could the motherboard of ET4 be upgraded to ET4 Pro’s? Does the TMC2208 version of motherboard you'd like to order compatible for your ET4? Recently it seems to be a big concern among some users.
Today we are going to give a clear answer but before that let’s figure out how much do you know about ET4 & ET4 Pro, at the most superficial level.

  • 1. The Differences among ET4, ET4+ and ET4 Pro


Around the beginning of Feb 2020, we had an upgrade on Anet ET4 on its leveling sensor. But it’s not our task in this article to tell how the new and old ET4 differ in their functions. We just pose it to tell you what the differences in their appearance for avoiding the happening of wrong update when someone doesn’t see clearly what model their printer belongs to.

1> Their Nameplates and Colors.

“ET4+” is just a habitual call to identify the new ET4. In fact, ET4 and ET4+ have the same name “ET4” on the nameplate pasted on the left side of their pedestal and the same black + red color. 
ET4 Pro is named as, of course, “ET4 Pro” with full black color.

2> The Leveling Sensors

ET4’s leveling sensor is a film strip while ET4+ and ET4 Pro have the same sensor build-in automatic bed leveling sensor.

Image
leveling sensor is a filmy strip


Film strip leveling sensor on ET4

Image
build-in leveling sensor of et4 pro


Build-in leveling sensor on ET4+ and ET4 Pro

3> The Firmware Info

They all have their own name displayed on their firmware info.

Image
Firmware info of ET4


Firmware V1.1.5 of ET4

Image
Firmware of ET4+


Firmware V1.0.0 of ET4+

Image
Firmware of ET4 Pro


Firmware V1.0.2 of ET4 Pro


  • 2. The Matters of the Commutative Motherboard Upgrade between Any Two Models of ET4 series


So when you read here, we must assume that you will never mistake any model of ET4 that’s already been released. Before you update the firmware of your ET series printers or plan to order a TMC2208 silence mainboard for your ET4 or ET4+, please note that:

· The firmware/mainboard of ET4 cannot be upgraded to ET4 Pro, and vice versa.
· The firmware/motherboard of ET4+ cannot be upgraded to any model of ET4, vice versa.

· Please confirm the TMC2208 step driver silent mainboard you want to order has the firmware consistent with your printer.

If you didn’t upgrade your printer according to these requests, your printer would exactly brick.