3D printer software and firmware discussion, sharing, and downloads
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.
2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.
3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.
4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.
5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
- Posts: 196
- Joined: 2020-06-24 1:56
The firemware update of ET4 V1.1.2 has improved from the following places:
・ Modify the filament retreat phenomenon after refueling and back to print.
・ Reduce the Z-axis moving and acceleration speed.
・ Shorten the trigger time for thermal runaway protection.
・ Add French user interface
・ Limit the work of the limit switch only when homing.
・ Modify "Load and Unload" translation,
・ The control button works only after homing or automatic leveling or manual leveling or homing compensation has been completed. The motor stops after prints finish.
Download link: ET4 V1.1.2 https://drive.google.com/drive/folders/ ... SZWijOjPDq