Page 1 of 1

ANET ET4 FIREWARE UPDATE ET4 V1.1.2

Posted: 2020-06-29 1:08
by AnetLau
The firemware update of ET4 V1.1.2 has improved from the following places:

・ Modify the filament retreat phenomenon after refueling and back to print.
・ Reduce the Z-axis moving and acceleration speed.
・ Shorten the trigger time for thermal runaway protection.
・ Add French user interface
・ Limit the work of the limit switch only when homing.
・ Modify "Load and Unload" translation,
・ The control button works only after homing or automatic leveling or manual leveling or homing compensation has been completed. The motor stops after prints finish.

Download link: ET4 V1.1.2 https://drive.google.com/drive/folders/ ... SZWijOjPDq

Image