Page 1 of 1

Firmware link ET4 Pro wrong

Posted: 2021-01-08 1:45
by umtauscher
Hi,
I just wanted to inform you, that the firmware link for the ET4 Pro on your homepage is faulty and leads to a firmware for the ET4n.
Please correct this.
Thanks

Re: Firmware link ET4 Pro wrong

Posted: 2021-01-08 19:43
by AnetLau

Re: Firmware link ET4 Pro wrong

Posted: 2021-01-28 1:18
by hexatrik
AnetLau wrote: 2021-01-08 19:43 Thanks, we have repaired it.

https://shop.anet3d.com/blogs/et-series ... ion-v3-0-0
Hi, You have mentioned filename for ET4 Pro as “et4pV3.0.0.zip” but where as on the google drive download file available is , it is “et4nV3.0.0.zip”. This file is NOT working in my ET4 Pro. I have copied bin and txt files into SD Card. Im getting error message " Update Fail" in printer while upgrading my ET4 Pro immediately I press OK button...
Please help

Re: Firmware link ET4 Pro wrong

Posted: 2021-01-28 9:54
by ilros
No it is not. It leads download link to to a firmware for the ET4 for the ET4n.

Re: Firmware link ET4 Pro wrong

Posted: 2021-01-28 18:32
by nahum35
Edit: I have located the issue after reviewing some other forums with similar issues (mostly of the ET4's not being able to read the microSD cards). It appears the Samsung EVO card I purchased at the same time is also not recognized. I had to use another card which ultimately the ET4 Pro can read models from. (It was a Sandisk branded card).

Note: I will make a separate, new post for another of several issues I was facing since just recently receiving my printer, and still waiting for *something* from Support via email.

******************** ORIGINAL POST ********************
Hello,
When attempting to update with v3.0.0 based on the instructions noted, my ET4 Pro continues to show "Update failed". Is this a known issue? Coming from v1.0.2 (same as instructions page, which additionally shows the flashed version is no longer an ET4 "Pro"?).

Re: Firmware link ET4 Pro wrong

Posted: 2021-01-30 2:09
by hexatrik
There is a difference in file name. it is mentioned as to download " et4pV3.0.0.zip " but in drive you have " et4nV3.0.0.zip " file. Please clarify.

Re: Firmware link ET4 Pro wrong

Posted: 2021-02-01 9:08
by umtauscher
Sorry, but this is rediculous.
I have pointed out weeks ago, that the link is pointing to the wrong file.
And what you have done is to set another link to the exact same WRONG file.
I give up.

Re: Firmware link ET4 Pro wrong

Posted: 2021-02-01 12:17
by A2ET4P
format SD card, rename "et4nV3.0.0.bin into et4pV3.0.0.bin" copy to sd card. Insert SD card into the ET4 Pro printer and switch power on , goto info and try upgrade. In my case it worked.
I could not see much difference, file browsing maybe changed . After Firmware upgrade the info screen only showed ET4 instead of ET4 Pro and Version number.