Anet N4 Firmware V1.65 & AIPrint V1.09 Slicing Software Updates

Get feedback on your 3D designs! Show off your 3D Models & Prints and receive feedback/comments!
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
AnetLau
Posts: 813
Joined: 2020-06-24 1:56

Please be noted that the firmware and the slicing software need to be updated all together!

Alprint for Windows
Hidden Content
This board requires you to be registered and logged-in to view hidden content.

Alrpint for Mac
Hidden Content
This board requires you to be registered and logged-in to view hidden content.


Step Guide of Anet N4 firmware update:

A. Download and copy the firmware update files N4_V1.09.bin on your flash drive.
B. Click “Printing” and select N4_V1.09.bin on the files list.
C. Click print and it would pop up a message “Whether to update firmware?”. Click “Enter”.
D. Wait for update until the firmware information show version V1.65.


User avatar
virgiliodant
Posts: 1
Joined: 2020-08-25 6:29

I need to help with the anet n4 slicer, I bought a resin that the manufacturer recommends that the first layers have a maximum of 35 seconds of exposure, but in AIPrinter the minimum is 60 seconds. How can you help me? Is there any other slicer that I can use with my anet? have her firmware available for download?

resin I bought: http://www.3dprime.com.br/
User avatar
AnetLau
Posts: 813
Joined: 2020-06-24 1:56

virgiliodant wrote: 2020-08-25 6:32 I need to help with the anet n4 slicer, I bought a resin that the manufacturer recommends that the first layers have a maximum of 35 seconds of exposure, but in AIPrinter the minimum is 60 seconds. How can you help me? Is there any other slicer that I can use with my anet? have her firmware available for download?

resin I bought: http://www.3dprime.com.br/
it is no allow to use other slicer software.
User avatar
AnetLau
Posts: 813
Joined: 2020-06-24 1:56

virgiliodant wrote: 2020-08-25 6:32 I need to help with the anet n4 slicer, I bought a resin that the manufacturer recommends that the first layers have a maximum of 35 seconds of exposure, but in AIPrinter the minimum is 60 seconds. How can you help me? Is there any other slicer that I can use with my anet? have her firmware available for download?

resin I bought: http://www.3dprime.com.br/
this is the video about how to modify exposure time.

Post Reply