Open Source Firmware of ET4

Talking About Open Source Of Anet 3D Printer
User avatar
paulgart
Posts: 1
Joined: 2020-09-18 0:32

When can you upgrade to open source from micro sd?


User avatar
iain1965
Posts: 2
Joined: 2020-09-15 2:27

davidtgbe wrote: 2020-09-17 10:51 Hi Iain,
You are using Autobuild. Don't use it, you are building marlin for mks robin instead et4. Just build with the platform.io build button.
If you keep on having problems, check these instructions:
https://github.com/davidtgbe/Marlin
(use translator for this) https://github.com/davidtgbe/Marlin/blo ... uild-es.md
No I'm not building for MKS Robin....it defaults to that environment even after changing in platformio.ini file to ET4.

I even tried building using the build option in platformIO and still no luck. I will try your solution though and update.
Screenshot 2020-09-18 161324.png
Last edited by iain1965 on 2020-09-18 8:15, edited 2 times in total.
User avatar
Matosantos
Posts: 4
Joined: 2020-08-17 5:56

iain1965 wrote: 2020-09-18 8:11
davidtgbe wrote: 2020-09-17 10:51 Hi Iain,
You are using Autobuild. Don't use it, you are building marlin for mks robin instead et4. Just build with the platform.io build button.
If you keep on having problems, check these instructions:
https://github.com/davidtgbe/Marlin
(use translator for this) https://github.com/davidtgbe/Marlin/blo ... uild-es.md
No I'm not building for MKS Robin....it defaults to that environment even after changing in platformio.ini file to ET4.

I even tried building using the build option in platformIO and still no luck. I will try your solution though and update.

Screenshot 2020-09-18 161324.png
Que raro que no te facilite una solución Anet, parece que copian un código abierto de otro pero como ellos no lo han creado no saben tan siquiera dar soporte a los problemas de la comunidad.
User avatar
hollp
Posts: 2
Joined: 2020-09-25 17:05

(português )
Last edited by hollp on 2020-09-25 17:24, edited 1 time in total.
User avatar
hollp
Posts: 2
Joined: 2020-09-25 17:05

para quem esta com problema no touch screen

deixe apertado o touch screen por 10 segundo ai ira entrar no modo de calibração, faça a calibração e o touch screen voltara a funcionar
(português Brasil)
User avatar
mhonthie
Posts: 1
Joined: 2020-10-05 1:48

i have an Anet ET4 Pro, what firmware can i use ?\
\
User avatar
ranger0283
Posts: 1
Joined: 2020-10-08 4:50

Is this good for the ET4X?
User avatar
AnetLau
Posts: 813
Joined: 2020-06-24 1:56

ranger0283 wrote: 2020-10-08 4:57 Is this good for the ET4X?
yes, it is suitable for ET4 series.
User avatar
simonreef
Posts: 2
Joined: 2020-08-17 12:19

I can't compile the firmware with PlatformIO can someone tell me how to do it?
Post Reply