ANET ET4+ Nozzle Sizes

Anet 3D printers, add-ons and OEM
Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
Posts: 1
Joined: 2021-02-01 8:28

I recently obtained an ET4+ printer for Christmas and have been having a lot of fun with it; though I have been wanting to play around with smaller nozzle sizes for higher resolution printing, though I have run into an issue.

I purchased a set of nozzles (.02, .03, .04, etc.) that says they should be compatible to the ET4+, though I've noticed their physical size is approxmately 1.5 times smaller than my current nozzle the ET4+ shipped with. (Which is a .04)

When I install the .02, it fits the threads in the heating block OK, and I can get it to extrude out of it when loading the filament. But when I attempt to print (I've changed Cura settings to recognize a .02 nozzle), it doesn't print, my feeder teeth seem to be 'clicking' and stripping the filament, and it simply doesn't work.

Does the ET4+ support smaller nozzle sizes? Or am I just purchasing the wrong nozzles? (The nozzle I bought said compatibility with the ET4+) If so, what nozzles should I be purchasing?

Post Reply