StrandBox -- Small gadgets storage box

Community rules
1. Be kind and courteous
We're all in this together to create a welcoming environment. Let's treat everyone with respect. Healthy debates are natural, but kindness is required.

2. No hate speech or bullying
Make sure everyone feels safe. Bullying of any kind isn't allowed, and degrading comments about things such as race, religion, culture, sexual orientation, gender or identity will not be tolerated.

3. Only 3D printers advertised.
Only 3D printers or directly related product may be advertised. If you post anything else it will be moderated and you will be banned.

4. Replying to posts
If you reply to a post, make sure your reply is connected with the main topic, do NOT take a topic off track.

5. All post are moderated
Every post on here is moderated - always. Don't bother joining unless you have works to share or problems to inquiry about 3D printers. That is all that will be allowed on this group.
Post Reply
User avatar
Posts: 816
Joined: 2020-06-24 1:56


Download Link:
Hidden Content
This board requires you to be registered and logged-in to view hidden content.


PLEASE consider to get a decent printer before you print this design. It's rather challenging.

Print 1 CASE, 1 HNDL, 2 LOCK, 4 FEET per set.
Put a rubber band in the groove will make it secure better.

Since many people asked. I also uploaded the painting masks.
But I got to warn you, they are rather difficult to print and put together.
0.1mm or less layer hight recommended.

Inspired by Kojima's "Death Stranding" video game.

Print Settings





Created by gumo_design in

Post Reply